Used Terex Finlay I-140 Track Impact Crusher

Tier 4 Final: Scania DC13 368kW (500hp) Engine, Terex CR032 Impact Chamber, Fully Hydraulically Assisted Apron Setting and Hydraulic Apron Release, Manual Raise Chamber Flap Allowing Extra Inlet Clearance, 4 Bar Rotor – Tool Steel Blow Bars 2 High & 2 Low, Direct Drive via Clutch, Drive Belt Tensioner Wheel, Blow Bar Lifting Tool Supplied, Top Speed Range 35-44 m/sec (115-144 ft./sec). Rotor Fitted with 2 Full Martensitic Ceramic & 2 Low Martensitic Blow Bars, VGF Fixed Hopper Stepped Grizzly Feeder with Integral Pre-screen, Standard 50mm Spacing, Mesh Aperture on Grizzly Feeder: 38mm, Selectable Discharge to By-pass Conveyor or Main Conveyor, Blanking Mat for VGF, Pre-Screen Top Deck Fitted with Side Tensioned Mesh, 30mm Aperture Standard, 1300mm (51″) Belt Full Length, Hydraulic Raise/Lower for Magnet, Piped for Over Band Magnet, Standard Oils – (Recommended for Ambient Temperatures Between -5 to +30°C), Piped for Dust Suppression c/w Spray Bars, Emergency Stops, Hand Held Track Control Set with Connection Lead, T-Link Telemetry System Fitted c/w 7 Years Data Subscription, Bundled Deal with Ancillary Services, Radio Remote System, Safety Guards in Compliance with Machinery Directive, Auxiliary Drive

On Lease